Miyoshi lacquerware have a"DX large lunch box lacquering"isMiyoshi lacquerware of the founding of Meiji 44 years,traditional"Kishu lacquerware"origin of Wakayama Prefecture Kainan in 歴世 over,lacquerware segment in which they operate and you can. 400 years of the history of the Kishu lacquerware,traditional techniques and carefully manufactured. "Miyoshi lacquer ware magewappa・DX large lunch box lacquering"is interesting natural cedar wood many times coated with lacquer in made. Lacquer was magewappa is both stately and increase.
Miyoshi lacquer ware magewappa lunch box and so on.
Home cleaner wash with no issues. Urethane Paint(Lacquer products lacquer)coating has been applied, the detergent used to wash can.【Q2】bleach is used?
Fall color or wood is sore may be in, bleach is not available.【Q3】oil and blackheads from?
Oil and food is also no problem. Urethane Paint(Lacquer products lacquer)coating has been applied, the black one there is no fear.【Q4】magewappa is using a microwave good for?
Can't be used. Heat is applied by the sear, if you will,of the deformation may cause please note.【Q5】tableware dryer use is possible?
Can't be used. Rapid drying in the wood is scratched that will help you save much money. Natural drying by the dry please.【Q6】soak possible?
Soak please refrain. A long soak in water as wood absorbs moisture and wounds that will help you save much money.
Magewappa isMagewappa is a cedar and Cypress, such as the sheet metal bends made from a cylindrical wooden box of this. Mainly and one, or lunchbox as it is often. Even cold and the rice plump and delicious, can keep.
Magewappa lunch box how to use・how to care
Miyoshi lacquer ware magewappa production processMiyoshi lacquer ware magewappa is a traditional techniques and production methods from generation to generation the craftsmen have been passed down from generation to generation. A complex and extremely intricate form of technology made in Miyoshi lacquer ware magewappa of the manufacturing process will introduce.
1. Selecting wood / lumber
Miyoshi lacquerware have used logs of cedar to be considered as part of the selection process. Lumber and materials to make.
2. Member take
Manufacturing to have a combination of wood length and width is decided.
Advance wood soaked in water and. 1 days for the water to boil. Temperature of 80 ° C. and the material is soft and will bend easily.
Wooden mold along the wood to bend. Damaged carefully, so as not to do.
A week~ten days in the natural dried. Tree shears at the fixed edge glued in......
6. Bottoming out
The bottom plate until it snaps into position. Accompanied technology is required.
7. Painting and polishing
The Potter's wheel(Potter's), such as using the finish, and finally hand polished.
Miyoshi lacquer ware magewappa is completed.